Help Center

Optimize Your gFiber Wi-Fi Speeds and Wireless Connection

Learn how to optimize router placement, clear signal obstacles, set up mesh extenders, check device capabilities, and troubleshoot common Wi-Fi slowdowns.

To optimize your gFiber Wi-Fi performance, place your router in a central, elevated location away from physical obstacles, position mesh extenders halfway to dead zones, and verify that your devices support modern Wi-Fi 6E or Wi-Fi 7 standards.

Manage your network in the app

You can monitor your network, run speed tests, and restart your router directly from your mobile device.

  1. In the gFiber App (or Google Home app if using Google Wifi / Nest Wifi Pro), tap Network.
  2. Tap Router details, then tap Run Speed Test to check connection health or tap Restart router to power cycle your gateway.
  3. Confirm that your network status displays Online after the reboot completes.
alert-red
Important Notice: The Network Box router has officially been retired and is no longer supported on gFiber service. If you still have a Network Box, you will need to upgrade to a modern router at no extra cost to manage your network settings and maintain optimal connectivity. 

Optimize router placement

Wi-Fi signals travel outward in all directions. Placing your router in an optimal location improves coverage across your home.

  • Position centrally: Select a central room in your home floorplan to broadcast wireless signals evenly across all living spaces.
  • Elevate the hardware: Place the router on a table or shelf at least 3 to 5 feet off the ground. Avoid placing hardware on the floor.
  • Maintain open space: Keep the router in an open, ventilated area. Do not hide hardware inside closets, cabinets, drawers, or behind entertainment centers.
  • Ensure line of sight: Position your primary devices so they have a direct line of sight to the router whenever possible.
tool-tip-info
Check your device signal strength icon in your operating system taskbar. A full signal indicator confirms an optimal connection path.

Overcome Wi-Fi obstacles and interference

Physical obstacles and competing electronic devices degrade radio signals. Keep the top, sides, and front of your router completely clear of signal-blocking materials.

Interference LevelMaterial TypeImpact on Wi-Fi
Severe BlockageConcrete, Cinder Blocks, Brick, MetalHeavily reflects or absorbs radio waves, causing dead zones.
Moderate BlockageDrywall, Wood, Thick Glass, Large MirrorsWeakens signal strength as radio waves pass through walls.
Electronic InterferenceMicrowaves, Baby Monitors, Bluetooth devicesDisrupts airwaves by competing on similar radio frequencies.

Optimize mesh extender placement

Most average-sized homes do not require a Mesh Extender. If you have a large home or persistent coverage gaps, proper placement of your extender ensures consistent signal coverage without causing network congestion.

  1. Identify the area in your home where Wi-Fi coverage drops.
  2. Locate a power outlet halfway between your main gFiber router and the dead zone.
  3. Plug in the Mesh Extender at this midpoint location.
  4. On your mobile device, open the gFiber App and verify that the Mesh Extender status indicates a strong backhaul connection to the primary router.
tool-tip-info
For maximum speed and stability, connect your Mesh Extender directly to your primary router using an Ethernet cable (hardwired backhaul) if your home is pre-wired.
alert-warning
Avoid placing the extender directly inside a dead zone. If the extender receives a weak signal from the router, it will broadcast a slow connection to your devices. Use 2 or fewer extenders to prevent network interference.

Check device age and capability

Your internet speed is limited by the capabilities of the receiving device. Legacy devices cannot achieve multi-gigabit speeds regardless of proximity to the router.

  • Wi-Fi 7: Included with gFiber Multi-Gig Lifestyle Internet Products (Home 3 Gig and Edge 8 Gig). Wi-Fi 7 introduces Multi-Link Operation (MLO), allowing the router and your devices to transmit data over multiple wireless bands simultaneously.
    • Requirements: Requires a gFiber Wi-Fi 7 Router paired with a Wi-Fi 7 compatible device (smartphones and laptops manufactured in 2025 or later) to reach over-the-air speeds up to 3.4 Gbps.
  • Wi-Fi 6E: Included with Core 1 Gig. Utilizes a dedicated 6 GHz band to bypass neighborhood network interference.
    • Requirements: Requires a gFiber Wi-Fi 6E Router and a Wi-Fi 6E compatible device to access the 6 GHz channel lane.
  • Wi-Fi 5 and Wi-Fi 6 (Older Standards): Older computers, smart home gadgets, and legacy phones connect seamlessly to your gFiber router, but operate at lower maximum throughput speeds dictated by their internal wireless chipsets.

Frequently asked questions